Steam shower FAQ's

How much does the steam function cost to run?

The steam functions cost surprisingly little to run. Based on current costs for electricity to operate the steam function for a recommended maximum of half and hour is around 30-50 pence. Compare this to the cost of travelling to a Sauna in a Health ...

What are the electrical requirements of a Steam Shower?

You should always seek advice from an electrician prior to installing your shower and also view the installation instructions in this regard. 3kw Steam Showers (without Whirlpool baths) require only a single 13amp electrical supply. With whirlpool require...

What's the water pressure required for your showers?

Steam showers require between 1 and 3 bar of pressure at the unit to operate. For optimum results 2-3 bar is recommended. Please note that all Steam Cabins require a flow rate of at least 7.5 litres per minute and steam showers around 14 litres. The ...

Do I need to tile under or behind the unit?

It is recommended that you fully tile under your shower, steam shower or whirlpool bath, this is because they are designed to be freestanding and as such may be required to be slid away from the wall for service access. Tiling fully under the tub enables...

I'm in a hard water area, can I still have a shower?

Yes. If you know you live in a Hard water area, you may well have a water softener fitted to your water supply to remove the build-up, if not you must fit one for the water purpose of most manufacturers, as this will protect the steam generator from ...

Did you find what you were looking for?